attach shanty to snowmobile...

General Discussion: This is a great place to go to post your questions, comments, suggestions (and even complaints!). Please keep the postings at a professional level.
Thank You!

Moderators: Chamookman, capt.dan

Singing Bridge
Posts: 3
Joined: July 26th, 2013, 9:44 pm
Location: MidMichigan

attach shanty to snowmobile...

Unread post by Singing Bridge » December 28th, 2019, 2:42 pm

I picked up a used Otter ice shanty with a towbar… I can attach it to my bumper but it will slide sideways and scratch the daylights out of it... is there an easy receiver to place on the rear bumper? Thanks ahead of time!

megamike
Posts: 5
Joined: November 9th, 2015, 10:30 pm

Unread post by megamike » December 30th, 2019, 5:43 am

You can make a hitch to mount to your rear grab bar/bumper. 2 U bolts and a piece of 1/8 inch steel will work. I put a piece of rubber hose around the grab bar so the U bolts wouldn't dig into the aluminum. It's pretty simple, and effective.

386xf
Posts: 43
Joined: February 19th, 2012, 1:02 pm
Location: Thumb

Unread post by 386xf » December 30th, 2019, 11:09 pm

my dad took an old belt looped it over the bumper drilled three holes in a piece of flat stock two to attach the belt with a couple bolts and one to hook to the sled. Crude but effective.

Singing Bridge
Posts: 3
Joined: July 26th, 2013, 9:44 pm
Location: MidMichigan

Unread post by Singing Bridge » January 1st, 2020, 6:36 pm

Great recommendations, thanks !!

Bridge

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests